BMG supplies an extensive range of hydraulic and pneumatic seals and sealing solutions for demanding environments. BMG is also the only official distributor for Hallite Seals International Ltd within Central and Southern Africa.
“Hallite sealing systems are manufactured from robust materials which include nitrile rubbers, rubber and fabric compounds and thermoplastic elastomers – all proven to keep a system free from external contamination,” says Marc Gravett, business unit manager of BMG’s Seals and Gaskets division. “Hallite’s design engineers and material technologists give careful attention to seal profile design and material selection. Product properties are methodically studied to ensure that the finished component has the required qualities to cope efficiently in harsh operating conditions.
“Seals are subjected to extensive testing that reproduces continuous operating conditions where leakage, dynamic and breakout friction are recorded and performance factors like pressure, speed and temperature are carefully monitored.”
Included in this range of hydraulic and pneumatic seals are rod and gland seals, piston and static seals, as well as support and bearing components, which are constantly upgraded to keep abreast with changing market demand.
Hallite type 780 double-acting piston seals with a robust assembly for efficient operation, offer reduced wear resistance and extended service life on any hydraulic cylinder application.
Although these piston seals have been designed especially for one piece pistons, they are also suitable for two piece pistons. The type 780 is similar to the popular DAS seal.
These double-acting seals consist of a nitrile rubber sealing element, two split support rings and two split L-shaped bearings – one of each is located on either side of the seal.
The sealing element is designed with multi-lips for efficient and dynamic sealing with minimal low pressure friction. When pressurised, the lips of the support ring are extended to protect the system from extrusion damage.
The support rings – which are manufactured from a tough, flexible polymer – and the L-shaped bearings are grooved to ensure that the fluid’s pressure properly energizes the sealing element and also prevents pressure-trapping within the seal assembly.
These double-acting piston seals are able to withstand operating conditions at a maximum speed of 0,5 m/sec, a temperature range of between – 30°C and +100°C and at a maximum pressure of 400 bar.
Hallite type 506 self-lubricating bearing strips, which are designed for high load capability, low friction and minimal swell, are manufactured to tight tolerances, providing bearing solutions for reciprocating, oscillating and slow rotary movement applications.
These easy-to-use bearing strips are available as cut rings (which are cut to size and customer specifications) and are ready for installation. They are also supplied as spiral lengths in various pre-formed diameters to suit a range of inside and outside diameters. These bearing strips are also available in a flat coil form in 10 meter lengths suitable for a wide range of diameters. Flat coils are packed into a dispenser for easy handling and storage.
Hallite type 506 bearing strips are used extensively on hydraulic cylinder rod and piston applications and can withstand extreme side loads, preventing metal to metal contact. The material’s design incorporates micro indentations on the bearing strip’s surface to trap fluid and provide built-in lubrication to the bearing.
The bearing strip is manufactured using a woven fabric reinforced polyester resin material that is compatible with different fluids, including mineral oils, water-based fluids and phosphate esters.
BMG’s extensive range of quality branded sealing products – which includes rotary shaft, torric, hydraulic and pneumatic seals, as well as allied products like O-rings, waved washers, circlips, mechanical seals, gland packing and adhesives – complies with stringent international and local quality specifications.
The company’s commitment to providing high quality seals is evident in the extreme care taken in brand selection, in terms of standardisation, reliability, flexibility and consistent quality controls. These sealing products meet the demands of the OEM and end user for efficient performance from equipment that needs to work harder and for longer periods, as productivity levels increase.
BMG, which has been exclusive distributors in Southern Africa for Hallite Seals for over 35 years, provides a technical advisory and support service in all sectors.